ONE2ID elektronica PCB labels

ONE2ID polyimide kapton labels

PCB

The extreme temperatures and aggressive cleaning agents a PCB (printed circuit board) is exposed to during its manufacturing process put special demands on the type of label that is used for identification. ONE2ID offers a range of labels suitable for both manual application and auto apply systems.

Request samples Custom-made advice

Products

 ONE2ID polyimide kapton labels

POLYIMIDE M-1201 Low Profile

  • 25µ Kapton® with a permanent, acrylic adhesive.
  • Silk gloss topcoat.
  • Suitable for manual application only.
  • Suitable for top side and bottom side application or identification at any given moment before or after the PCB manufacturing process.
  • Designed to withstand harsh environments such as extreme high temperatures, aggressive fluxes and cleaning solvents during and after the PCB manufacturing process.
  • Suitable for wave & reflow soldering as well as SMD and through-hole mounting.
  • Blank or pre-printed with customer-specific information.
  • Suitable for barcodes, datamatrix, QR codes and human readable information.
  • Operating temperatures: -40°C up to +300°C.
  • Recommended for use with resin ribbons.
  • Available in white.

ONE2ID polyimide kapton labels

POLYIMIDE M-1202 Standard

  • 50µ Kapton® with a permanent, acrylic adhesive.
  • Silk gloss topcoat.
  • Suitable for manual application and compatible with auto-apply systems (Hover-Davis, Rommel, Nutek, CAB, ASYS et al.).
  • Suitable for top side and bottom side application or identification at any given moment before or after the PCB manufacturing process.
  • Designed to withstand harsh environments such as extreme high temperatures, aggressive fluxes and cleaning solvents during and after the PCB manufacturing process.
  • Suitable for wave & reflow soldering as well as SMD and through-hole mounting.
  • Blank or pre-printed with customer-specific information.
  • Suitable for barcodes, datamatrix, QR codes and human readable information.
  • Operating temperatures: -40°C up to +300°C.
  • Recommended for use with resin ribbons.
  • Available in white.

ONE2ID polyimide kapton labels

POLYIMIDE M-1205 Buff Amber

  • 50µ Kapton® with a permanent, acrylic adhesive.
  • Matte topcoat.
  • Suitable for manual application and compatible with auto-apply systems (Hover-Davis, Rommel, Nutek, CAB, ASYS et al.).
  • Suitable for top side and bottom side application or identification at any given moment before or after the PCB manufacturing process.
  • Designed to withstand harsh environments such as extreme high temperatures, aggressive fluxes and cleaning solvents during and after the PCB manufacturing process.
  • Suitable for wave & reflow soldering as well as SMD and through-hole mounting.
  • Blank or pre-printed with customer-specific information.
  • Suitable for barcodes, datamatrix, QR codes and human readable information.
  • Operating temperatures: -40°C up to +300°C.
  • Recommended for use with wax/resin ribbons.
  • Available in buff amber.

 ONE2ID polyimide kapton labels

POLYIMIDE M-1209 ESD

  • 25µ Kapton® with a permanent, acrylic adhesive.
  • Silk gloss topcoat.
  • Suitable for manual application only.
  • Suitable for top side and bottom side application or identification at any given moment before or after the PCB manufacturing process.
  • Designed to withstand harsh environments such as extreme high temperatures, aggressive fluxes and cleaning solvents during and after the PCB manufacturing process.
  • Suitable for wave & reflow soldering as well as SMD and through-hole mounting.
  • Blank or pre-printed with customer-specific information.
  • Suitable for barcodes, datamatrix, QR codes and human readable information.
  • Operating temperatures: -40°C up to +300°C.
  • Recommended for use with resin ribbons.
  • Available in white.

 ONE2ID polyimide kapton labels

POLYIMIDE M-1211 High End

  • 50µ Kapton® with a permanent, acrylic adhesive.
  • High gloss topcoat.
  • Suitable for manual application and compatible with auto-apply systems (Hover-Davis, Rommel, Nutek, CAB, ASYS et al.).
  • Suitable for top side and bottom side application or identification at any given moment before or after the PCB manufacturing process.
  • Designed to withstand harsh environments such as extreme high temperatures, aggressive fluxes and cleaning solvents during and after the PCB manufacturing process.
  • Suitable for wave & reflow soldering as well as SMD and through-hole mounting.
  • Blank or pre-printed with customer-specific information.
  • Suitable for barcodes, datamatrix, QR codes and human readable information.
  • Operating temperatures: -40°C up to +300°C.
  • Recommended for use with resin ribbons.
  • Available in white.

ONE2ID Type plates

TYPE PLATE STANDARD M-1002 & M-1009 & M-1103

  • Multi-purpose polyesters with a permanent, acrylic adhesive.
  • Semi-gloss or gloss topcoat.
  • Excellent adhesive properties, specifically on smooth and slightly textured surfaces.
  • Suitable for both in- and outdoor use.
  • Suitable for rough surfaces such as electrical equipment and painted steel.
  • Suitable for general labelling, type plates, barcodes and alphanumeric identification.
  • Minimum application temperature: +10°C.
  • Operating temperatures: -40°C up to +150°C.
  • Recommended for use with (high) resin ribbons.
  • Available in white and silver.

ONE2ID Type plates

TYPE PLATE EXTREME M-1008 & M-1101

  • Multi-purpose polyesters with a thick, permanent, acrylic adhesive.
  • Semi-gloss or gloss topcoat.
  • Strong adhesive properties, specifically on rough and uneven surfaces.
  • Suitable for both in- and outdoor use.
  • Resistant to chemicals and oils.
  • Suitable for smooth, rough and textured surfaces, e.g. plastic with low surface energy, electrical enclosures and cast aluminium.
  • Suitable for general labelling, type plates, saftey signs, barcodes and alphanumeric identification.
  • Minimum application temperature: +10°C.
  • Operating temperatures: -40°C up to +150°C.
  • Recommended for use with (high) resin ribbons.
  • Available in white and silver.

ONE2ID Type plates

TYPE PLATE EXTREME PLUS M-1105

  • Multi-purpose polyester with a permanent, acrylic adhesive.
  • Semi-gloss topcoat.
  • Strong adhesive properties on low energy surfaces.
  • Resistant to chemicals and changing weather conditions.
  • Can be easily applied manually due to the thickness of the polyester.
  • Suitable for smooth surfaces, e.g. plastic with low surface energy, electrical enclosures and cast aluminium.
  • Suitable for general labelling, type plates, saftey signs, barcodes and alphanumeric identification.
  • Minimum application temperature: +10°C.
  • Operating temperatures: -40°C up to +150°C.
  • Recommended for use with (high) resin ribbons.
  • Available in silver.

ONE2ID Economy label

ECONOMY M-1404

  • Polypropylene with a permanent, acrylic adhesive.
  • Extremely suitable for adhesion to plastic and metal.
  • Extremely suitable for curved surfaces, both in- and outdoors.
  • Suitable for general labelling, automotive security labels, barcodes and alphanumeric identification.
  • Resistant to UV, changing weather conditions, household chemicals and many automotive lubricants.
  • Complies with FDA 175.105 and EU food directives and legislations.
  • Minimum application temperature : +5°C.
  • Operating temperatures: -20°C up to +80°C.
  • Recommended for use with wax/resin and resin ribbons.
  • Available in white and yellow.

ONE2ID Repositionable labels

REPOSITIONABLE M-1450

  • Polypropylene with a non-permanent, acrylic adhesive.
  • Extremely suitable for adhesion to plastic and metal.
  • Extremely suitable for curved surfaces, both in- and outdoors.
  • Suitable for general labelling, metal components, barcodes and alphanumeric identification.
  • Resistant to UV and changing weather conditions.
  • Complies with FDA 175.105 and EU food directives and legislations.
  • Minimum application temperature: +5°C.
  • Operating temperatures: -20°C up to +80°C.
  • Recommended for use with wax/resin and resin ribbons.
  • Available in white and yellow.

ONE2ID security label destructible

DESTRUCTIBLE M-1422

  • 50µ gloss, metallised PVC.
  • Provides visible evidence of tampering upon removal.
  • Suitable for long-term outdoor use.
  • Suitable for curved and lightly to mildly textured surfaces.
  • Suitable for consumer electronics, automotive, security and authentication applications.
  • Resistant to UV, chemicals and oil.
  • Minimum application temperature: +4°C.
  • Operating temperatures: -40°C up to +85°C.
  • Recommended for use with (high) resin ribbons.
  • Available in silver.

ONE2ID destructible security labels

DESTRUCTIBLE M-1423

  • Semi-gloss, white PVC.
  • Provides visible evidence of tampering upon removal.
  • Suitable for curved and lightly to mildly textured surfaces.
  • Resistant to UV, chemicals and oils.
  • Suitable for consumer electronics, automotive, security and authentication applications.
  • Minimum application temperature : +4°C.
  • Operating temperatures: -40°C up to +85°C.
  • Recommended for use with (high) resin ribbons.
  • Available in white.