ONE2ID Cable labels

Cables

The choice of cable identification is dependent on both the application and the working environment. Using the right label can help you work safely, efficiently and cost-effectively.

Request samplesContact

Products

ONE2ID Self-laminating labels

SELFLAM M-1301

  • Permanent, self-laminating, memory-free vinyl.
  • Strong adhesive powers, even on small diameters and at low and elevated temperatures.
  • Printable coating, suitable for resin thermal transfer ribbons.
  • Oil- and chemical-resistant.
  • Minimum application temperature: +10°C.
  • Operating temperatures: -40°C up to +80°C.
  • Available in yellow and white with black mark or notches for printer identification.

ONE2ID Cable tag

CABLE TAG PUR M-1821

  • High quality, flame retardant polyether polyurethane (PUR).
  • Halogen-free. Complies with UL94-V0.
  • Long-lasting.
  • Excellent scratch and chemical resistance after printing.
  • Can be applied with cable ties.
  • Cost-saving continuous roll or on liner.
  • Continuous roll more easily printable compared to competitive brands.
  • Minimum application temperature: +10°C.
  • Operating temperatures: -25°C up to +80°C.
  • Available in yellow, white, red, pink, magenta, purple, grey, brown, light blue, dark blue, black, orange and dark green.

ONE2ID Shrink sleeves

SHRINK SLEEVE ZH M-1801

  • Halogen-free and flame retardant polyolefin.
  • Shrink ratio 2:1.
  • Range of wire diameter: 1,2-42mm.
  • On liner or continuous roll.
  • Width: 38 or 50mm. Die-cut and perforation in several different sizes available upon request.
  • Resistant to chemicals and high temperatures.
  • Minimum application temperature: +10°C.
  • Operating temperatures: -30°C up to +105°C.
  • Available in yellow and white, and for most commonly used printers. Various colours and sizes available upon request.
  • Format can be adapted to suit competitive brands, e.g. Brady and Tyco.

ONE2ID Shrink sleeves

SHRINK SLEEVE COM 2:1 M-1802

  • Halogen-free and flame retardant polyolefin.
  • Shrink ratio 2:1.
  • Range of wire diameter: 1,2-42mm.
  • On liner.
  • Width: 38 or 50mm. Die-cut and perforation in several different sizes available upon request.
  • Excellent value for money.
  • Resistant to chemicals and high temperatures.
  • Minimum application temperature: +10°C.
  • Operating temperatures: -40°C up to +125°C.
  • Available in yellow and white, and for most commonly used printers. Various colours and sizes available upon request.
  • Format can be adapted to suit competitive brands, e.g. Brady and Tyco.

ONE2ID Shrink sleeves

SHRINK SLEEVE COM 3:1 M-1804

  • Halogen-free, flame retardant and self-extinguishing polyolefin.
  • Shrink ratio 3:1.
  • Range of wire diameter: 0,8-42mm.
  • On liner or continuous roll.
  • Width: 38 or 50mm. Die-cut and perforation in several different sizes available upon request.
  • Excellent value for money.
  • Resistant to chemicals and high temperatures.
  • Minimum application temperature: +10°C.
  • Operating temperatures: -55°C up to +135°C.
  • Available in yellow and white, and for most commonly used printers.
  • Format can be adapted to suit competitive brands, e.g. Brady and Tyco.

ONE2ID Nylon labels

NYLON M-1502

  • Permanent and memory-free nylon.
  • Extra strong adhesive properties on plastic and rubber surfaces.
  • Suitable for rough, curved or contoured surfaces.
  • Smooth topcoat suitable for resin and wax/resin thermal transfer ribbons.
  • Resistant to most chemicals and oils.
  • Minimum application temperature: +10°C.
  • Operating temperatures: -196°C up to +180°C.
  • Available in white.

ONE2ID Cable flags

CABLE FLAG M-1404

  • Polypropylene with a permanent, acrylic adhesive.
  • P- and T-shaped.
  • Suitable for alphanumeric and barcode labelling.
  • Resistant to UV, weather conditions, household chemicals, and many automotive lubricants.
  • FDA approved.
  • Minimum application temperature: +10°C.
  • Operating temperatures: -40°C up to +150°C.
  • Available in white and yellow.

ONE2ID Vinyl labels

VINYL STANDARD M-1321

  • Flexible, permanent vinyl.
  • Gloss topcoat.
  • Suitable for both indoor and outdoor use.
  • Suitable for curved and textured surfaces.
  • Suitable for product and location identification as well as signage.
  • Resistant to oils and chemicals.
  • Minimum application temperature: +10°C.
  • Operating temperatures: -40°C up to +80°C.
  • Available in white and yellow. Various colours and sizes available upon request.

ONE2ID Vinyl labels

VINYL EXTREME M-1351

  • Flexible, permanent, outdoor vinyl.
  • Gloss topcoat.
  • Suitable for indoor and outdoor use. 8-10 years guaranteed outdoor use.
  • Suitable for curved and smooth surfaces.
  • Suitable for product and location identification, signage and warning signs.
  • Resistant to oils and chemicals.
  • Minimum application temperature: +10°C.
  • Operating temperatures: -40°C up to +90°C.
  • Available in black, white and yellow. Various colours available upon request.

ONE2ID strong tags

TAG STANDARD M-1471

  • Polypropylene, plastic TAG.
  • Extremely strong tag for long-term use, both in- and outdoors.
  • Can be mounted with staples, metal wire, rope, cable ties, or in a label holder.
  • Suitable for high resolution barcode and/or location code.
  • Monostructure makes for easy recycling.
  • Minimum application temperature: -20°C.
  • Operating temperatures: -40°C up to +70°C.
  • Multiple layouts available.
  • Available in white.

ONE2ID extra strong tags

TAG EXTREME M-1470

  • Polyethylene, plastic TAG.
  • Extremely strong, virtually untearable tag for long-term use, both in-and outdoors.
  • Can be mounted with staples, metal wire, rope, cable ties, or in a label holder.
  • Suitable for high resolution barcode and/or location code.
  • Monostructure makes for easy recycling.
  • Minimum application temperature: -20°C.
  • Operating temperatures: -40°C up to +90°C.
  • Multiple layouts available.
  • Available in white.

ONE2ID Aluminium tag

ALUMINIUM/STAINLESS STEEL TAG

  • Pre-printed, aluminium or stainless steel TAG.
  • Very strong adhesive and/or with pre-drilled holes for screws or rivets.
  • Suitable for 1D or 2D barcodes, additional texts and logos.
  • UV- and scratch-resistant printing, guaranteed to up to 20 years outdoor use as well as freezer use.
  • Resistant to aggressive cleaning agents, washers and high pressure cleaning up to 150 bar.
  • Minimum application temperature: dependent on chosen adhesive.
  • Operating temperatures: -40°C up to +500°C.
  • Available in silver/metal look with black font and codes, and/or colour logos.